EN 388 is the European standard for gloves that protect against mechanical risks: abrasion, cuts, tears, punctures and impacts. Its pictogram, a shield with a hammer, sits above a row of numbers and letters that tell a buyer exactly how well the glove performed in each test. Reading that code correctly is the quickest way to compare work gloves.

This guide explains each position of the EN 388 code, the two cut tests, the impact letter, and what to specify when you order mechanic or leather work gloves.

Reading the EN 388 code

Since the 2016 revision, the code under the pictogram has up to six characters, for example 4 1 3 1 B P:

PositionTestRange
1Abrasion resistance (cycles before a hole appears)0–4
2Cut resistance, coup test0–5, or X if not tested
3Tear resistance0–4
4Puncture resistance0–4
5Cut resistance, ISO 13997 (TDM) testA–F, or X if not tested
6Impact protection (optional)P if passed

Higher numbers and later letters mean better protection. An “X” means the test was not done or does not apply; a “0” means the glove was tested and fell below level 1.

Two cut tests

The coup test (position 2) uses a rotating circular blade. Highly cut-resistant materials such as glass fibre and steel blunt the blade during the test, which can give misleading results. For those materials the ISO 13997 test (position 5), which uses a straight blade and measures the force needed to cut through, is the reference. If a glove shows a letter in position 5, the coup result in position 2 may be marked X.

ISO 13997 levelABCDEF
Minimum cut force (newtons)2510152230

Impact protection

A “P” at the end of the code means the knuckle and back-of-hand protection passed an impact test (to EN 13594). Impact mechanic gloves with TPR or padded knuckle guards are designed for this test; they suit mechanics, oil and gas, mining and construction work where hands can be struck or crushed.

Other glove standards

What to put in your specification

  1. The standard and the minimum levels you need, for example “EN 388 3121XP”.
  2. Palm material: synthetic leather, cowhide grain or split leather, and any double-palm reinforcement.
  3. Back material and knuckle protection (TPR or padded) if impact protection is needed.
  4. Cuff: elastic, hook-and-loop or safety cuff.
  5. Colours, logo position and size range (usually S–XXL).
  6. Packaging: pairs per polybag, bags per carton, and any retail header card.
  7. Documents: ask for the certificates and test reports for the exact model.

Work gloves from Gratex Industries

Sialkot is a long-established centre for glove making. We make work gloves from 25 pieces per style, including impact mechanic gloves, leather work gloves and double-palm leather gloves. Tell us the performance levels you need and we will confirm materials before sampling. See our certificates page for documents, or learn more about us as a workwear manufacturer.

Request a quote WhatsApp the factory

Search

Get in Touch with Gratex Industries

Have a question or need a quote? Fill out the form and our team will respond