EN 12477 is the European standard for welders’ protective gloves, and it divides them into two types: Type A for heavy, spatter-intensive welding and Type B for precise work such as TIG welding. Choosing the wrong type either leaves the welder under-protected or makes fine work slow and tiring, so the type is the first thing to settle when you buy welding gloves.

This guide explains the difference between Type A and Type B, the tests behind them, and what to specify when you order.

Type A vs Type B

Type AType B
PriorityProtectionDexterity
Typical processesMMA (stick), MIG/MAG, flux-cored welding, heavy gas cuttingTIG welding, fine gas welding
Typical constructionThicker split or grain cowhide, long gauntlet cuff, heat-resistant liningThin goatskin or soft grain leather, little or no lining, close fit
FeelStiffer, warmer, very spatter resistantFlexible, good touch for feeding filler rod

The tests behind each type

EN 12477 combines mechanical tests from EN 388 with heat and flame tests from EN 407. Type A must reach higher levels than Type B:

TestType A (min.)Type B (min.)
Abrasion (EN 388)21
Blade cut (EN 388)11
Tear (EN 388)21
Puncture (EN 388)21
Burning behaviour (EN 407)32
Contact heat (EN 407)11
Convective heat (EN 407)2—
Small spatter of molten metal (EN 407)32
Dexterity (EN ISO 21420)14

The gloves must also cover the wrist area with a cuff long enough for welding; Type A gauntlets usually reach well up the forearm.

Choosing for your customers

Gloves are only part of the outfit: welders also need flame-resistant clothing. See our guide to EN ISO 11611 welding clothing.

What to put in your specification

  1. The standard and type: “EN 12477 Type A” or “Type B”.
  2. Leather: cowhide split or grain, or goatskin for TIG; thickness if you have a requirement.
  3. Lining: cotton, fleece or heat-resistant lining, full or palm only.
  4. Cuff length and whether seams are sewn with heat-resistant (aramid) thread.
  5. Colour, logo and size range.
  6. Documents: ask for the certificates and test reports for the exact model.

Welding gloves from Gratex Industries

We make leather welding gloves and leather TIG welding gloves in Sialkot, alongside our full range of work gloves, from 25 pieces per style. Tell us the type and materials you need and we will send samples within 3 to 5 working days. See our certificates page for documents, or learn more about us as a workwear manufacturer.

Request a quote WhatsApp the factory

Search

Get in Touch with Gratex Industries

Have a question or need a quote? Fill out the form and our team will respond