EN ISO 11611 is the international standard for protective clothing worn in welding and allied processes, and it has two classes: Class 1 for lower-risk welding and Class 2 for more hazardous, spatter-intensive work. It protects against small splashes of molten metal, short contact with flame and the radiant heat of the arc. Buyers supplying fabrication shops, shipyards, construction sites and maintenance teams will see it in almost every welding clothing tender.
This guide explains the two classes, what they are tested for, how EN ISO 11611 relates to EN ISO 11612, and what to specify when you order welding coveralls, jackets and trousers.
Class 1 vs Class 2
| Class 1 | Class 2 | |
|---|---|---|
| Risk level | Lower: less spatter and radiant heat | Higher: more spatter and radiant heat |
| Typical processes | Gas welding, TIG, MIG with little spatter, micro-plasma welding, brazing, spot welding, MMA with rutile electrodes | MMA with basic or cellulose electrodes, MAG with CO₂ or mixed gas, MIG with high current, flux-cored welding, plasma and oxygen cutting, thermal spraying, welding in confined spaces or overhead |
| Molten-metal drops to raise the sensor temperature by 40 K (min.) | 15 drops | 25 drops |
| Radiant heat transfer time, RHTI24 (min.) | 7 seconds | 16 seconds |
Class 2 garments are usually made from heavier fabric. Every garment must also pass a limited flame-spread test, shown on the label as A1 (surface ignition), A2 (edge ignition) or both.
Design rules for welding clothing
Molten drops must not collect on the garment, so the standard also governs design:
- Outer pockets need flaps, and pocket openings should not face upward where spatter can fall in.
- Trouser legs should have no turn-ups, and closures should be covered.
- Seams, thread and trims must be flame-resistant.
EN ISO 11611 vs EN ISO 11612
EN ISO 11612 covers heat and flame in general, using codes A to F. EN ISO 11611 is narrower: it is written for welding. Many FR garments carry both, which suits plants where workers weld as well as working near other heat sources. Where electrical work is also involved, check the arc rating too: see FR vs arc-rated clothing.
What to put in your specification
- The standard and class: “EN ISO 11611 Class 1” or “Class 2”, and the flame-spread code (A1, A2 or both).
- Any other standards needed, such as EN ISO 11612 or hi-vis EN ISO 20471.
- Fabric: FR-treated cotton or inherently flame-resistant blends, with weight in g/m².
- Garment type: coverall, jacket and trousers, or bib and brace; leather welding jackets for heavy work.
- Pocket flaps, covered closures and FR thread throughout.
- Colour, logo method (FR embroidery or transfer) and size range.
- Documents: ask for the certificates and test reports for the exact model.
Welding clothing from Gratex Industries
We make FR coveralls, FR jackets and FR pants and shirts in Sialkot from 25 pieces per style, plus leather welding gloves to complete the outfit (see our guide to EN 12477 welding gloves). Tell us the class you need and we will match fabric and construction. See our certificates page for documents, or learn more about us as a workwear manufacturer.